Что ожидать от топовых штекеров в 2005 году
взято с сайта Мило. но думаю это будет касаться и Колмика и традукко и Мавера и Сенсаса.
все делается на одном заводе и это изобретения не какогото из продавцов и именно регласа...
з.ы у кого есть время и желания перевести- велкам
++++++++++++++++++++++
SUN CORE
The “Sun Core” is a brand new manufacturing process which creates a closely-woven texture of metallic microparticles incorporated at molecular level into the blank structure. This particular construction forms a sort of protective “shell” on the blank surface with no extra weight added. The reflecting power of the microparticles maintains the blank temperature lower than on standard blanks keeping the pole action unaltered over time.
LINEAR JOINT - L.J.
The “Linear Joint” is an absolutely revolutionary concept designed to confer the pole a unique smooth profile. It consists in a linear reduction in diameters which eliminates the annoying “stair-step” effect produced by sections overlapping each other, typical of traditional poles. The “Linear Joint” system enables each joint to be smoothed down resulting in a uniformly tapered profile of the assembled pole with significant benefits in terms of rigidity, gliding qualities, joint strength and reduced blank surface.
MAGIC STEPS - M.S.
New patented system designed to solve the problem of elastic friction on the inside walls of the carbon tip and top section. It consists in a series of small rings forming a sort of “micro-steps”, integrated inside the tip and top section. This solution allows elastics of any diameter to slide more freely without any extra weight added to the either element. Additional field tests have demonstrated the efficiency of the “Magic Steps” system even on small size fish.
POWER ZONE - P.Z.
Specially designed for top-range poles, this solution eliminates the risk of top kit crushing during the fish retrieve. The Power Zone is an area, created at the base of the sections concerned, where strength is higher than ovalisation. This is obtained through variable-density fibres, which allow the section to be reinforced only where needed and not through the addition of external reinforcements which would add extra weight to the pole.
FUSION
This system introduces a significant improvement in the construction of the top section (section 2). The system combines the use of carbon and resins with a clever orientation of fibres to make the top section much more rugged and strong in the lower part and decidedly more rigid in the upper part resulting in added tip stability.
ANTI FRICTION SYSTEM - A.F.S.
This unique manufacturing process impresses on the blank a sort of microscopic “roughness” conferring opacity to the pole surface. When the pole is wet, the intrinsic opacity of the surface retains the water drops allowing the pole to glide through your hands when shipping and unshipping. The ASF offers additional advantages such as increased pole durability, higher anti-scratch resistance, faster retrieve action and easier cleaning operations; finally, this system eliminates hand reddening problems.
TEFLON JOINT. – T.J.
The Teflon Joint system is an ultra-thin Teflon film applied on the pole joints which protects the joint surface from wear and makes engagement of sections smoother preventing jamming. This self-lubricating hard wearing Teflon coating reduces the weight of sections dramatically as compared to standard sections with high modulus carbon joints. Lab tests have demonstrated that the Teflon-carbon joint has a wear resistance 50 times higher than a carbon-carbon joint.
CLEAN CAP SYSTEM. – C.C.S.
The Clean Cap System is designed to ensure that the pole joint remain always clean and clear of impurities. It consists of tapered “caps” designed to allow accurate engagement of sections and to protect the section end from shocks. The Clean Caps do not absorb water preventing the section from sinking.